Dual Axis Solar Tracker System | Automatic Sun Tracking Mount for Solar Panels

Description ECO-WORTHY - AUTOMATIC DUAL AXIS SOLAR TRACKER ECO-WORTHY Dual Axis Solar Tracker System | Automatic Sun Tracking Mount | Up to 40% More Solar Energy | 270 Degree Rotation | Up to 1200W Capacity Your solar panels are losing up to 40% of their potential output every single day – because they are fixed in one position. This dual axis tracker follows the sun from sunrise to sunset, continuously adjusting both horizontal and vertical angle so your panels always face the strongest available light. Real-world test data: 6,780Wh per day with the tracker versus 4,746Wh with fixed mounts. That is 43% more energy from the same panels. 40%MORE ENERGY270degROTATION RANGE1200WMAX CAPACITY2yrWARRANTY SUNSHINE SENSOR INCLUDEDWIND SPEED SENSOR INCLUDEDSMART CONTROLLER INCLUDEDGALVANIZED STEEL FRAME Speak to a Specialist Up to 40% More Energy Output Automatic Wind Protection 270 Degree Auto Rotation Worldwide Tracked Shipping 2-Year Manufacturer Warranty THE NUMBERS DON'T LIE Your fixed solar mount is leaving energy on the table every single day. Real test data. 1,200W solar array. Same panels. Same location. Same day. The only difference was the mounting system. DUAL AXIS TRACKER - TEST RESULT6,780WATT-HOURS PER DAYFull day generation with dual axis sun tracking on a 1,200W array. Tested August 2021 and 2022. FIXED MOUNT - SAME PANELS, SAME DAY4,746WATT-HOURS PER DAYStandard fixed-angle ground mount. Same capacity, same location, same conditions - significantly less output. The gap grows at the edges of the day. From 6am-7am, the tracker generated 288Wh versus just 34Wh from fixed mounts. That morning hour alone is nearly 9x more output. The same effect occurs late afternoon. Fixed mounts only perform near their rated capacity for 4-5 hours around midday. 40% MORE ENERGY 270deg ROTATION RANGE 1200W MAX SOLAR CAPACITY CHOOSE YOUR PACKAGE Tracker only, or complete with 1,170W of N-Type bifacial panels. Select your package at checkout. Both include the full tracker system, controller, sensors and actuators. Tracker System OnlyBRING YOUR OWN PANELSBest if you already have solar panels up to 1,200W rated capacity. Mounts up to 6 panels of 100-200W each (or 3 panels at 300W ). Includes everything except the panels themselves.INCLUDES- Dual Axis Solar Tracker Mount (galvanized steel)- Smart Tracking Controller- Sunshine Sensor (4-directional)- Wind Speed Sensor- Linear Actuators- All Mounting HardwareNote: Requires a 12V 10Ah lithium battery (not included) to power the tracking controller. COMPLETE KITTracker 6x 195W Solar Panels1,170W TOTAL CAPACITY - READY TO INSTALLEverything in the tracker-only package, plus 6x ECO-WORTHY 195W N-Type Bifacial Monocrystalline solar panels. Combined rated output of 1,170W. Order once, build once.EVERYTHING INCLUDED- Dual Axis Solar Tracker Mount (galvanized steel)- Smart Tracking Controller- Sunshine Sensor Wind Speed Sensor- Linear Actuators All Mounting Hardware- 6x 195W N-Type Bifacial Monocrystalline Panels- Total system capacity: 1,170WNote: Requires a 12V 10Ah lithium battery (not included) to power the tracking controller. WHERE THIS TRACKER GETS INSTALLED Anywhere the sun moves and fixed panels lose money. Ground space, a sunlit location, and a need for maximum energy from minimum panel count. That is all it takes. Residential PropertiesExtract maximum output from a limited number of panels. A tracked 1,200W array can outperform a static 1,700W array on the same site. Farms and Agricultural SitesPowers irrigation pumps, livestock systems and farm infrastructure throughout the working day. Tracker extends generation into early morning and late afternoon - exactly when farm loads peak. Off-Grid Energy SystemsMore daily Wh means larger battery storage reached each day and less chance of running short overnight. Pairs with LiFePO4 batteries and a quality MPPT charge controller. Research and Commercial SitesEducational institutions, solar research projects and commercial energy optimisation installations. The controller's programmable settings allow custom tracking profiles. SYSTEM COMPONENTS AND FEATURES Four intelligent systems working together around the clock. Sunshine SensorFour-directional sensor detects solar intensity from all angles simultaneously. Transmits real-time position data to the controller to calculate the optimal panel angle every few minutes throughout the day. Smart Tracking ControllerPre-wired controller with programmable wind protection, tracking sensitivity and cloudy/night return settings. Acts as the brain of the entire system - receives sensor data, controls actuators and manages automatic safety positioning. Wind Speed SensorWhen wind speed exceeds your user-defined threshold, the controller automatically returns panels to a flat horizontal position to protect the structure. Actuator IP65 rated. Max rated wind speed 17.2m/s. Dual Linear ActuatorsTwo industrial actuators drive the horizontal and vertical axes independently. 12V DC operation, 1,500N / 330 lbs load rating, 25% duty cycle. Available in 6 inch (150mm) or 12 inch (300mm) stroke options. Automatic Horizon ReturnAt night, during heavy cloud cover, or when wind exceeds the set threshold, the system automatically parks panels in horizontal position. Resumes tracking at sunrise. Fully autonomous - no manual intervention required. Galvanized Steel FrameHeavy-duty galvanized steel with corrosion-resistant finish. Main pole 4.9ft. Industrial-grade reinforced mounting structure designed for permanent outdoor installation in all climates. Up to 1,200W CapacitySupports 3x panels of 300W or 6x panels of 100-200W. Bracket width 111in (2,820mm), bracket length 106in (2,700mm). Ground space required: 110 x 110 inches. 4-Step InstallationFix base with expansion screws, connect rods and actuators to main pole, install 8 cross bars with controller, mount panels with clamps. Pre-wired controller reduces setup time significantly. 4-STEP INSTALLATION PROCESS Designed for a two-person installation in a single day. Pre-wired controller and pre-configured wiring reduces setup complexity. All hardware included. Video installation guide available via QR code on controller. 1Fix the BaseSecure the main pole base to your ground anchor or concrete foundation using expansion screws. Level carefully - this sets the vertical axis of the entire system. 2Connect Rods and ActuatorsConnect the A-E support rods and both linear actuators to the main pole assembly. Pre-labeled components make orientation clear. 3Mount Controller and Cross BarsInstall all 8 cross bars and attach the pre-wired tracking controller. Connect the sunshine sensor (facing south) and wind speed sensor. 4Fit Solar PanelsMount your solar panels using the included clamps. Connect panel wiring to your charge controller. Connect the 12V 10Ah lithium battery to power the tracking system. Done. COMPLETE TECHNICAL SPECIFICATIONS Full electrical and physical specifications. TRACKER SYSTEMProduct TypeAutomatic Dual Axis Solar TrackerTracking TypeDual Axis - Horizontal and VerticalRotation RangeUp to 270 degreesEnergy GainUp to 40% vs fixed mountsRecommended CapacityUp to 1,200WControllerSmart Solar Tracker Controller (included)Sunshine SensorIncluded - 4-directionalWind SensorIncludedActuator Voltage12V DCActuator Stroke Options6 in (150mm) and 12 in (300mm)Actuator ProtectionIP65Actuator Load Rating1,500N / 330 lbs / 150kgDuty Cycle25%Max Wind Speed17.2 m/s PHYSICAL AND BUILDFrame MaterialGalvanized Steel Aluminum AlloyItem Weight94 lbsProduct Dimensions110 x 110 x 64 inchesGround Space Required110 x 110 inchesMain Pole Height4.9 ftBracket Width111 in / 2,820 mmBracket Length106 in / 2,700 mmSKUEC-DATS-1200Warranty2 Years ManufacturerSOLAR PANEL KIT (WHEN SELECTED)Panel TypeN-Type Bifacial MonocrystallineRated Power (each)195WQuantity6 PanelsTotal System Capacity1,170WVmp / Voc20.2V / 24.5VImp / Isc9.65A / 10.14APanel Size1,335 x 670 x 35 mmPanel Weight9.29 kg each BUILD YOUR COMPLETE SOLAR SYSTEM What you need alongside this tracker to store and use the energy it captures. The tracker generates more power. These components store and deliver it. Under-speccing any one of them limits the whole system. 12V 10Ah Lithium BatteryRequired to power the tracking controller. This is the one component not included in either package - it must be sourced separately before the system will operate.View compatible batteries MPPT Charge ControllerSize your MPPT controller to match your total panel capacity and battery voltage. For 1,170W at 24V or 48V, a 40-60A MPPT controller is appropriate.View MPPT controllers LiFePO4 Battery BankStore the extra energy the tracker captures. At 40% more daily generation, you need 40% more storage capacity to use it all. Minimum 200Ah recommended for a 1,200W tracked array.View LiFePO4 batteries Pure Sine Wave InverterConvert stored DC battery power to AC for household use. Size to your peak AC load. For a complete off-grid home powered by this tracker, a 2,000-3,000W inverter is the typical starting point.View inverters FREQUENTLY ASKED QUESTIONS Everything buyers ask before investing in a solar tracker. Does the 40% energy gain figure hold in real conditions? The 40% figure is based on real field tests conducted in August 2021 and 2022 using a 1,200W solar array. The tracked array produced 6,780Wh over the full day versus 4,746Wh from a fixed mount with identical panels. The gain is most pronounced at the start and end of the day – the tracker was producing 288Wh per hour at 6am while fixed mounts produced just 34Wh. The exact gain at your location will vary based on latitude, season and local weather patterns, but dual axis tracking consistently outperforms fixed mounts in all climates with clear sun paths. What battery do I need to power the tracking controller? The controller requires a 12V 10Ah lithium battery to operate. This is NOT included in either package and must be purchased separately before the system will function. The controller draws very little power – a 10Ah battery powers it through the night easily and is recharged during the day. Any standard 12V lithium or lead-acid battery of 10Ah or above will work. Contact us on WhatsApp if you need help selecting a compatible battery. Can I use my existing solar panels with the tracker-only package? Yes – the tracker accommodates up to 6 panels of 100-200W each, or up to 3 panels of 300W or more, for a maximum recommended capacity of 1,200W. Panel size should fit within the 111 x 106 inch bracket dimensions. If your panels are significantly larger than standard residential panels (1,335 x 670mm), contact us on WhatsApp before ordering to confirm compatibility with your specific panels. How does the wind protection system work? The included wind speed sensor continuously monitors wind speed. You program a wind protection threshold in the controller settings. When wind speed exceeds your threshold, the controller automatically drives both actuators to return the panel array to a flat horizontal position, where it presents minimum wind resistance to the structure. The system holds that position until wind drops below the threshold, then resumes tracking. The actuators are IP65 rated and the maximum rated structural wind speed is 17.2m/s. What happens at night and on cloudy days? The controller has a programmable cloudy and night return mode. When solar radiation drops below the sensor threshold – either at nightfall or during heavy cloud cover – the system automatically parks the panels in a flat horizontal resting position. At sunrise or when cloud clears, tracking resumes from the east. This automatic return ensures the structure is always parked safely and ready to track from the optimal starting position. How much ground space does the installation require? The tracker requires a clear ground footprint of 110 x 110 inches (approximately 9.2 x 9.2 feet) for the panel array sweep zone. The main pole base is fixed – you will need to anchor it into concrete or an existing ground anchor. Allow additional clearance around the panel sweep area so tracking movement is unobstructed. The main pole itself is 4.9 feet tall. Contact us on WhatsApp to confirm site suitability before ordering. Is professional installation required? The manufacturer designed this for a two-person DIY installation using the included 4-step process and the video guide accessible via QR code on the controller. The pre-wired controller reduces electrical setup complexity significantly. That said, the base anchoring requires working with expansion bolts into a concrete surface, and the full structure weighs 94 lbs, so a second person and basic mechanical confidence are required. For large commercial installations or if you are unfamiliar with solar system wiring, we recommend involving a qualified electrician for the panel-to-controller wiring step. DELIVERY AND SHIPPING Worldwide delivery, fully tracked. US and International ShippingThis is a large and heavy item (94 lbs). US and EU shipping available. Delivery times vary by destination. Message us on WhatsApp before ordering to confirm current stock, shipping timeline and freight cost for your location. View shipping policy. Returns and Warranty14-day return policy - refund and exchange accepted for items in original condition. 2-year manufacturer warranty on all components. Contact our specialist team for warranty claims and technical support. STOP LOSING 40% OF YOUR SOLAR OUTPUT The sun moves. Your panels should too. Choose tracker only or the complete kit with 1,170W of N-Type bifacial panels. Our specialist team is on WhatsApp to help you specify the right configuration for your site. Order on WhatsApp Speak to a Specialist